本课程是物联网（IOT）程序设计入门专项课程专项课程的一部分

4.7
星
6,883 个评分

Ian Harris

175,919 人已注册

提供方

物联网（IOT）程序设计入门专项课程加州大学尔湾分校

课程信息

90,692 次近期查看

The Arduino is an open-source computer hardware/software platform for building digital devices and interactive objects that can sense and control the physical world around them. In this class you will learn how the Arduino platform works in terms of the physical board and libraries and the IDE (integrated development environment). You will also learn about shields, which are smaller boards that plug into the main Arduino board to perform other functions such as sensing light, heat, GPS tracking, or providing a user interface display. The course will also cover programming the Arduino using C code and accessing the pins on the board via the software to control external devices. Please note that this course does not include discussion forums.
Upon completing this course, you will be able to:
      Outline the composition of the Arduino development board
      Describe what it means to program the board's firmware
      Read board schematics
      Install Arduino IDE
      Describe what "shields" are and how they are used
      Specify the role of libraries in the use of shields
      Compile and run a program
      Name C Variables and Types
      Name common C operators
    Use conditionals and loops
    Explain functions, their definition and invocation
    Explain the implications of global variables
    Undertake the Arduino build process
    Describe the role of the tools behind the IDE
    Describe how to invoke functions in classes
    Explain the structure of an Arduino sketch
    Access the pins of the Arduino
    Differentiate between digital and analog pin
    Debug embedded software
    Explain the importance of controllability and observability in the debugging process
    Describe common debugging architectures for embedded systems
    Explain how the UART Serial communication protocol works
    Describe how the Arduino Serial library performs serial communication

可灵活调整截止日期

根据您的日程表重置截止日期。

可分享的证书

完成后获得证书

100% 在线

立即开始，按照自己的计划学习。

第 2 门课程（共 6 门）

物联网（IOT）程序设计入门专项课程

完成时间大约为13 小时

英语（English）

对员工进行热门技能培训能否为您的公司带来益处？

体验 Coursera 企业版

您将获得的技能

Arduino
C Programming
Debugging

可灵活调整截止日期

根据您的日程表重置截止日期。

可分享的证书

完成后获得证书

100% 在线

立即开始，按照自己的计划学习。

第 2 门课程（共 6 门）

物联网（IOT）程序设计入门专项课程

完成时间大约为13 小时

英语（English）

对员工进行热门技能培训能否为您的公司带来益处？

体验 Coursera 企业版

授课教师

授课教师评分

4.71/5 （1,049 个评分）

Ian Harris

Professor

Department of Computer Science

522,632 个学生

9 门课程

提供方

加州大学尔湾分校

Since 1965, the University of California, Irvine has combined the strengths of a major research university with the bounty of an incomparable Southern California location. UCI’s unyielding commitment to rigorous academics, cutting-edge research, and leadership and character development makes the campus a driving force for innovation and discovery that serves our local, national and global communities in many ways.

了解顶级公司的员工如何掌握热门技能

了解关于 Coursera for Business 的更多信息

授课大纲 - 您将从这门课程中学到什么

内容评分96%（26,705 个评分）

周

周 1

完成时间为 3 小时

Arduino Environment

This module provides an introduction to the Arduino environment which is composed of three things: the Arduino board, the Arduino IDE, and the Arduino-compatible shields together with their libraries. We first investigate the board, discussing all of its main components, inputs, and outputs. We discuss how each component is used and we examine the board schematic to see how they are connected. We then discuss the Arduino Integrated Development Environment (IDE) which is used primarily to write, compile, and upload code. We survey the interface of the IDE and discuss how to install and use it. We also examine the use of shields to extend the functionality of an Arduino-based system. We discuss how shield libraries provide a useful abstraction to facilitate programming.

完成时间为 3 小时

9 个视频（总计 51 分钟）, 4 个阅读材料, 2 个测验

9 个视频

Module 1 Introduction (video)1分钟

Lecture 1.1: Arduino Platform8分钟

Lecture 1.2: Arduino Board7分钟

Lecture 1.3: Direct Programming3分钟

Lecture 2.1: Arduino Schematics4分钟

Lecture 2.2: Arduino IDE7分钟

Lecture 2.3: Compiling Code4分钟

Lecture 3.1: Arduino Shields and Libraries6分钟

Lecture 3.2: Arduino Basic Setup6分钟

4 个阅读材料

Pre-Course Survey10分钟

Course Overview10分钟

Module 1 Objectives10分钟

Module 1 Reading10分钟

1 个练习

Module 1 Quiz30分钟

周

周 2

完成时间为 3 小时

C Programming

This module covers the basics of the C programming language which will be used to write code for the Arduino. The course first covers basic syntax, variables, and types. Most of the basic C operators are presented. Conditional statements (if, switch) and loops (while, for) are described. The concept of functions is presented together with how to define and call functions. Creation and use of global variables is explained.

完成时间为 3 小时

9 个视频（总计 62 分钟）, 4 个阅读材料, 2 个测验

9 个视频

Module 2 Introduction (video)54

Lecture 1.1: Setting Up Your Environment7分钟

Lecture 1.2: Hello World6分钟

Lecture 1.3: Variables4分钟

Lecture 2.1: Basic C Operators6分钟

Lecture 2.2: Conditionals7分钟

Lecture 2.3: Loops8分钟

Lecture 3.1: Functions10分钟

Lecture 3.2: Global Variables7分钟

4 个阅读材料

Module 2 Objectives10分钟

Module 2 Mandatory Reading10分钟

Module 2, Recommended Reading10分钟

Planning Ahead for Modules 3 and 410分钟

1 个练习

Module 2 Quiz30分钟

周

周 3

完成时间为 3 小时

Arduino Programs

This module describes the composition of an Arduino program, or sketch, and the process by which it is compiled and uploaded. The Arduino IDE is a user interface for the software tools which actually compile and upload the program. We outline the use of these tools in the build process. We describe the basic structure of a sketch, including the use of the setup() and loop() functions. The main interface of an Arduino is through its pins, so we describe how to access those pins from a sketch.

完成时间为 3 小时

10 个视频（总计 58 分钟）, 3 个阅读材料, 2 个测验

10 个视频

Module 3 Introduction (video)1分钟

Lecture 1.1: Arduino Toolchain5分钟

Lecture 1.2: Cross-Compilation4分钟

Lecture 1.3: Arduino Sketches9分钟

Lecture 2.1: Classes7分钟

Lecture 2.2: Sketch Structure4分钟

Lecture 2.3: Pins7分钟

Lecture 3.1: Input and Output6分钟

Lecture 3.2: Blink Example5分钟

Video Demonstration: Arduino Blink Example4分钟

3 个阅读材料

Module 3 Objectives10分钟

Module 3 Reading10分钟

Information About the Arduino10分钟

1 个练习

Module 3 Quiz30分钟

周

周 4

完成时间为 3 小时

Module 4

This module is an introduction on debugging embedded software on an Arduino. We discuss the basic debugging requirements: controllability and observability. The debugging environment available for an Arduino UNO is limited, so we describe how to use the UART communication protocol to gain controllability and observability. We present the use of the Serial library to communicate with the Arduino through the serial monitor.

完成时间为 3 小时

9 个视频（总计 72 分钟）, 4 个阅读材料, 2 个测验

9 个视频

Module 4 Introduction (video)1分钟

Lecture 1.1: Debugging12分钟

Lecture 1.2: Debug Environments12分钟

Lecture 1.3: Debug via Serial8分钟

Lecture 2.1: UART Protocol7分钟

Lecture 2.2: UART Synchronization7分钟

Lecture 2.3: UART Parity and Stop6分钟

Lecture 3.1: Serial on Arduino (Updated)11分钟

Lecture 3.2: Reading from Serial4分钟

4 个阅读材料

Module 4 Objectives10分钟

Module 4 Reading10分钟

Information about the Arduino10分钟

End-of-Course Survey10分钟

1 个练习

Module 4 Quiz30分钟

审阅

4.7

1561 条评论

5 stars
73.25%
4 stars
21.53%
3 stars
3.64%
2 stars
0.84%
1 star
0.72%

来自ARDUINO 平台与 C 语言程序设计的热门评论

由 SS 提供Sep 8, 2016

I like this Course so much,In this course nothing is prerequisite,Instructor is very good he expains every things very nicely.I thinks all the student can do this course.

由 AM 提供Aug 13, 2017

The course is great. It teaches in detail each and every aspect of arduino platform but it is very basic, it could be made more challenging as far as programming is concerned.

由 AG 提供May 29, 2020

very nice and handy course for arduino beginners. but you need a little bit of knowledge about microcontrollers beforehand. you cannot start with an absolutely blank canvas.

由 KP 提供Jun 13, 2020

This was the second course in the specialization, and I could get a good amount of knowledge on the Arduino circuit and could go baby steps into programming into the next course

查看所有评论

关于物联网（IOT）程序设计入门专项课程

Design, create, and deploy a fun IoT device using Arduino and Raspberry Pi platforms.

This Specialization covers embedded systems, the Raspberry Pi Platform, and the Arduino environment for building devices that can control the physical world. In the final Capstone Project, you’ll apply the skills you learned by designing, building, and testing a microcontroller-based embedded system, producing a unique final project suitable for showcasing to future employers. Please note that this specialization does not offer discussion forums.

常见问题

我什么时候能够访问课程视频和作业？
讲座和作业的访问权限取决于您的注册类型。如果您以旁听模式参加课程，则可以免费查看大多数课程资料。要访问评分作业并获得证书，您需要在旁听期间或之后购买证书体验。如果看不到旁听选项：
课程可能不提供旁听选项。您可以尝试免费试用，也可以申请助学金。
课程可能会改为提供'完整课程，没有证书'。通过此选项，您可以查看所有课程材料、提交所要求的作业，以及获得最终成绩。这也意味着您将无法购买证书体验。
我订阅此专项课程后会得到什么？
您注册课程后，将有权访问专项课程中的所有课程，并且会在完成课程后获得证书。您的电子课程证书将添加到您的成就页中，您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容，可以免费旁听课程。
有助学金吗？
是的。如果您负担不起学习计划的注册费，则可以在选择学习计划时申请助学金或奖学金。如果您选择的学习计划提供助学金或奖学金，则您将在描述页面上看到一个申请链接。

还有其他问题吗？请访问学生帮助中心。

培养员工技能，推动业务成果

探索 Coursera for Business

Arduino 平台与 C 语言程序设计

课程信息

您将获得的技能