Chevron Left
返回到 Pressure, Force, Motion, and Humidity Sensors

学生对 科罗拉多大学波德分校 提供的 Pressure, Force, Motion, and Humidity Sensors 的评价和反馈

4.7
219 个评分

课程概述

"Pressure, Force, Motion, and Humidity Sensors" can also be taken for academic credit as ECEA 5342, part of CU Boulder’s Master of Science in Electrical Engineering degree. This is our third course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled Sensors and Sensor Circuits. Our first course gives you a tutorial on how to use the hardware and software development kit we have chosen for the lab exercises. This third course assumes that you already know how to use the kit. After taking this course, you will be able to: ● Understand how to specify the proper AC or DC motor for a machine design. ● Integrate the motor to a machine, based on analysis of motor equations for voltage, current, torque and speed. ● Implement the motor and accompanying rotary sensor into a motor control circuit in both hardware and software. ● Add a motor and motor control circuit into a microprocessor based development kit. ● Create hardware and firmware to process motor feedback data to a microprocessor for further evaluation. After taking this course, you will be able to: ● Understand how to specify the proper pressure, force, strain, position, motion, acceleration, occupancy, and humidity sensors for taking real-time process data. ● Implement these sensors into an embedded system in both hardware and software. ● Add the sensor and sensor interface into a microprocessor based development kit. ● Create hardware and firmware to process sensor signals and feed data to a microprocessor for further evaluation. In this course you will build the circuit from Video 7 (Lab Exercise on strain gauges), Module 2 (Force and Strain Sensors and Touch Screens), and use it to make screen shots of the timing of the switch. If you haven't already wired up the system and written all the software per the instructions of Video 7, please do so now. You will need to buy the following components to complete this assignment. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. One part needs to be purchased off the Sparkfun website www.sparkfun.com. Or, you may obtain the specs from the site, and purchase them elsewhere. Digikey Part numbers are typed out here: 428-3390-ND CF14JT22K0CT-ND CF14JT100KCT-ND Table shown here: Index Quantity Part Number Description 1 1 428-3390-ND PSOC 5LP PROTOTYPING KIT 2 2 CF14JT22K0CT-ND RES 22K OHM 1/4W 5% AXIAL 3 1 CF14JT100KCT-ND RES 100K OHM 1/4W 5% AXIAL Sparkfun part numbers are typed out here: TAL221 Table shown here: Index Quantity Part Number Description 1 1 TAL221 Mini-load cell - 100g, straight bar Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

热门审阅

BJ

Aug 14, 2022

Great introduction course to sensors. I really enjoyed the instructors videos as they were clear and engaging. I would recommend it.

TH

Aug 27, 2020

This course is very interesting. I completed this course.But I can not get my certificate.Please help me to earn my certificate.

筛选依据:

1 - Pressure, Force, Motion, and Humidity Sensors 的 25 个评论(共 48 个)

创建者 JiaJie, X

Jul 15, 2020

创建者 Paul P

Apr 9, 2020

创建者 Pablo C S

Nov 12, 2019

创建者 HET V B

Jul 28, 2020

创建者 Amit A

Jul 5, 2020

创建者 Vinsensius C F

May 1, 2020

创建者 Enrique V

May 29, 2020

创建者 MR. V S

May 12, 2020

创建者 Abhishek K

May 10, 2020

创建者 Mr.KAUSTUBH K S

Apr 21, 2020

创建者 Bonifasius B S A

May 16, 2020

创建者 Ngo T D

Mar 4, 2021

创建者 Guillaume V

Apr 3, 2020

创建者 Brittany j

Aug 15, 2022

创建者 Theint Z H

Aug 28, 2020

创建者 Kasuntha M

Nov 11, 2020

创建者 Sachin G

Nov 3, 2020

创建者 Nimisha M

Dec 23, 2020

创建者 KARIMULLA S

Aug 3, 2020

创建者 Pankaj R

Sep 20, 2022

创建者 Ganesh R P

Jun 23, 2020

创建者 Neredikomma S R

Jun 12, 2020

创建者 Yared B

Jan 28, 2021

创建者 Jos� R

Aug 2, 2020

创建者 P S K R

Jun 12, 2020